Exposed aggregate concrete · Werribee
What is the average cost of exposed aggregate?
We don't publish a price for exposed aggregate in Melbourne, because it changes with the job. The main factors are the area, removal of what's there now, base preparation, the stone mix you choose, how far the surface is exposed, sealing, and access for the truck or pump.
Exposed aggregate has more finishing steps than a plain broom finish: washing back the surface, cleaning and sealing. Ask each quote to list those steps separately and to say whether GST is included, so you can compare like with like.
What are the downsides of exposed aggregate concrete?
These are the trade-offs to weigh before you choose it:
- It's rougher underfoot than a smooth finish, which matters for bare feet around an alfresco area or pool.
- It needs sealing, and the seal needs renewing over time (see the sealing section below).
- The colour depends on the stone. Suppliers note that natural aggregates vary from batch to batch, and Boral recommends choosing from an actual sample rather than a photo.
- Sealing can make it slippery. Dulux's data sheet for its exposed aggregate sealer warns that sealing on a slope can make the surface slippery, particularly when wet. Ask what the concreter will do about grip on a sloping driveway.
Can you lay exposed aggregate over existing concrete?
Sometimes, but it depends on the slab underneath. Exposed aggregate is usually a new slab. Going over existing concrete needs a topping or overlay, and that only makes sense if the old slab is sound and isn't moving.
If your existing concrete is cracked, sunken or lifting, ask the concreter to assess whether it should be broken out and replaced. Our driveway resurfacing page covers what to photograph for that assessment.
How is exposed aggregate made?
Concrete containing the chosen stones is placed and finished like a normal slab. The top layer of cement paste is then removed, usually by applying a surface retarder and washing it off, so the stones show through. The surface is cleaned and then sealed.
How far the stones are exposed changes both the look and the grip, so ask to see a sample at the exposure you're being quoted.
Sealing exposed aggregate
Sealer helps keep dirt and stains out of the surface and holds the look of the stone. How often to reseal depends on the product. For example, Dulux Avista's exposed aggregate sealer data sheet recommends recoating approximately every two years. Ask the concreter which sealer they use and follow that manufacturer's guidance.
If your existing exposed aggregate needs resealing, you can ask for it through the form below. Choose "Other / not sure" as the service and describe the area.
Choosing the stone and colour
Concrete suppliers publish decorative ranges you can look through before you talk to a concreter, for example Boral's exposed aggregate range. Shortlist a few, then confirm the final choice from a physical sample of the mix the concreter will actually order.